①The fastening ring of the electronic cigarette can be removed by prying open one of the electronic.


②Fasten the main body with a hex driver and turn it counterclockwise until it can continue to rotate. Rotate the No. 1 housing counterclockwise until it can't rotate. Insert the corresponding type of positioning ring on the electronic cigarette holder that needs to be disassembled from the middle of the No. 3 housing into the disassembling device. After inserting the bottom, rotate the No. 1 housing clockwise until it can't rotate. disassembling device.Using a hex screwdriver to rotate the tightening screw clockwise until it stops, then rotate the No. 3 housing counterclockwise. Rotate the No. 3 casing counterclockwise, and rotate the E-cigarette casing from the No. 3 casing by rotating four turns. Using a hex driver to turn the fastening screw counterclockwise until it can't rotate.Rotate the No. 1 housing counterclockwise until it can't rotate. Remove the e-cigarette from the middle of the No. 3 casing. Insert the removed electronic cigarette charging part into the middle of the base and insert it into the bottom of the base.
 

③Insert the end of the knocking tube from the middle of the electronic cigarette into the bottom.Then use a hammer to hit the top of the tapping tube, and tap the top of the tapping tube to the black smoke rod part of the electronic cigarette to take out the electronic cigarette. Unplug the circuit part of the electronic cigarette and the aluminum alloy case by hand.

Official Service